Contact
Hoe winkelen bij ons werkt
Bezorging
Winkelgids
Friction Stir Spot Welding: Engineering Analysis and Control
Engels
161 b
Tot 30 dagen retourrecht
Klanten kochten ook
/
Gebonden (paperback)
137.57
€
/
Gebonden (paperback)
14.82
€
/
Gebonden (paperback)
27.63
€
/
Gebonden (paperback)
29.04
€
/
Gebonden (paperback)
12.70
€
/
Gebonden (paperback)
100.15
€
Friction stir welding (FSW) was invented at The Welding Institute (UK) in 1991. In 1996, NASA began to investigate the use of Al-Li 2195 in the manufacture of the external fuel tanks. In 2005, just nine years later, NASA successfully took the FSW process from the laboratory to the manufacturing floor when external tank 134 took flight. While FSW has been the focus of a great deal of research for more than two decades, friction stir spot welding (FSSW) didn't become a serious topic of interest until the early 2000's. The initial development of FSSW was lead by Sumitomo, Mazda, Kawasaki, and Norsk Hydro. In 2003, Mazda implemented FSSW in the assembly of their RX-8. One identified drawback of this process is that the tooling leaves a keyhole in the weld which requires removal via either post-processing or costly specialized tool design. Pinless tool designs have been identified in the literature as a low-cost alternative in this situation. However, there exists very little information on the topic of the use of a pinless tool for FSSW and it is the purpose of this work to expand upon the understanding of the process through numerical simulation and experimentation.
Informatie over het boek
Engels
Geef dit boek vandaag nog cadeau
Dat gaat heel eenvoudig
1 Voeg het boek toe aan je winkelwagentje en selecteer Als cadeau bezorgen 2 Je krijgt van ons per omgaand een voucher 3 Het boek wordt bezorgd op het adres van de ontvangerDit vind je misschien ook interessant
/
Gebonden (paperback)
18.35
€
/
Gebonden (paperback)
29.44
€
/
Gebonden (paperback)
102.67
€
Hoi! Ik ben Libroamiko, je boekadviseur.
Hoe kan ik je helpen?